Value enhancement through high-quality design with higher functionality
Fouling causes economic damage to the boat. Maintaining value requires regular removal of fouling. It is better to prevent the adhesion of fouling
Your boat is an investment. Increase the value of your boat with a durable antifouling coating and individualise your boat with a design coating on the surface.
We can’t change the wind, but we can always adjust our sails to reach our destination.
Jimmy Dean
Only every 5 years expenditure for new antifouling – Long Time Protection
Annoyed by the annual antifouling coating with time-consuming cleaning and preparation? With an antifouling film, you can save yourself the trouble. With Speedshield Pro Marine you get up to 7 years guarantee on the fouling protection.
Low time expenditure – high economic return on chartering out
An antifouling coating with extensive hull cleaning and preparation takes many days. Time in which the boat could be used. In the total cost balance, take into account not only the manual costs, but also possible loss of income due to reduced use.
Use of the yacht worldwide
Many antifouling paints contain biocides. Different rules and regulations apply depending on the country and the water. With a Speedshield Marine Pro antifouling film, you can navigate all the waters of the world with legal certainty.
Environmentally friendly solution – full recyclability of old films – no image as an environmental polluter
When removing old antifouling coatings, care must be taken to ensure that no hazardous waste is released into the environment. With a new film coating, the old films are removed quickly and with little effort and then recycled – environmentally neutral and sustainable.
Application of the film by trained and certified teams
Our trained teams are on site all over Europe and foil your boat. We ensure professional application of the films and give you up to 7 years guarantee on our work
cost-effective reapplication of new antifouling foils after 5 or more years
Our antifouling foils also need to be renewed at some point. However, only after several years.
The old films are simply peeled off and, after a simple cleaning, the new self-adhesive antifouling films are applied directly – in a small fraction of the time otherwise needed for elaborate antifouling paints.
Our Speedshield Pro Marine antifouling films can also be applied to propellers. The extremely time-consuming propeller cleaning and often necessary mould restoration is no longer necessary with our solution.
When the boat is drained, e.g. for winter storage, no new antifouling is necessary, as is the case with paint coats.
If other work on the underwater hull is necessary – e.g. work on the steering gear or the drive – the boat is lifted out of the water. This also means that a new coat of antifouling paint is due.
Use of the yacht worldwide
Many antifouling paints contain biocides. Different rules and regulations apply depending on the country and the water. With a Speedshield Marine Pro antifouling film, you can navigate all the waters of the world with legal certainty.
Environmentally friendly solution – full recyclability of old films – no image as an environmental polluter
When removing old antifouling coatings, care must be taken to ensure that no hazardous waste is released into the environment. With a new film coating, the old films are removed quickly and with little effort and then recycled – environmentally neutral and sustainable.
Application of the film by trained and certified teams
Our trained teams are on site all over Europe and foil your boat. We ensure professional application of the films and give you up to 7 years guarantee on our work
cost-effective reapplication of new antifouling foils after 5 or more years
Our antifouling foils also need to be renewed at some point. However, only after several years.
The old films are simply peeled off and, after a simple cleaning, the new self-adhesive antifouling films are applied directly – in a small fraction of the time otherwise needed for elaborate antifouling paints.
Our Speedshield Pro Marine antifouling films can also be applied to propellers. The extremely time-consuming propeller cleaning and often necessary mould restoration is no longer necessary with our solution.
When the boat is drained, e.g. for winter storage, no new antifouling is necessary, as is the case with paint coats.
If other work on the underwater hull is necessary – e.g. work on the steering gear or the drive – the boat is lifted out of the water. This also means that a new coat of antifouling paint is due.
