Application of the film by trained and certified teams
Our trained teams are on site all over Europe and foil your boat. We ensure professional application of the films and give you up to 7 years guarantee on our work
cost-effective reapplication of new antifouling foils after 5 or more years
Our antifouling foils also need to be renewed at some point. However, only after several years.
The old films are simply peeled off and, after a simple cleaning, the new self-adhesive antifouling films are applied directly – in a small fraction of the time otherwise needed for elaborate antifouling paints.
Our Speedshield Pro Marine antifouling films can also be applied to propellers. The extremely time-consuming propeller cleaning and often necessary mould restoration is no longer necessary with our solution.
When the boat is drained, e.g. for winter storage, no new antifouling is necessary, as is the case with paint coats.
If other work on the underwater hull is necessary – e.g. work on the steering gear or the drive – the boat is lifted out of the water. This also means that a new coat of antifouling paint is due.
Use of the yacht worldwide
Many antifouling paints contain biocides. Different rules and regulations apply depending on the country and the water. With a Speedshield Marine Pro antifouling film, you can navigate all the waters of the world with legal certainty.
Environmentally friendly solution – full recyclability of old films – no image as an environmental polluter
When removing old antifouling coatings, care must be taken to ensure that no hazardous waste is released into the environment. With a new film coating, the old films are removed quickly and with little effort and then recycled – environmentally neutral and sustainable.
You don’t need to worry about anything. Speed Shield relieves you of the tedious work and takes care of your new anti-fouling film.
